EPRO PR6426/010-110+CON021/916-200 涡轮传感器

产品描述：

PR6426/010-110+CON021/916-200绝dui振动传感器用于测量频率范围 10…1000Hz 和 4...1000Hz的绝dui机械振动. 测量zd振幅可达 3mm (峰-峰值). 可提供与振动速度成正比的电压信号。 传感器提供几种基本型号，广泛应用于工业测量的多个领域。 坚固的结构允许安装在危险的环境。可以应用在各种涡轮机械、风扇、压缩机、齿轮箱、水泵、磨煤机等。 传感器PR 9268/60 和 PR 9268/70 尤其适用在高温的环境中，如应用在燃气轮机上。这种传感器有三种不同的灵敏度供选择。 测量线圈高输出低阻抗使传感器有很强的抗干扰性。

产品特点

用于测量机械的绝dui振动

电动式工作原理

安装简单

灵敏度高

结构坚固

工作运行温度高（达到200 oC）

测量频率范围 10…1000Hz 和 4...1000Hz

使用安全栅Ex可达到安全等 级ATEX

工作原理

绝dui振动传感器PR9268由一个地震块和一个由弹簧片支持的测量线圈组成。测量元件可在一个圆形永9磁铁的磁场中沿轴向移动（测量方向）。 传感器的固有频率在4-13Hz之间，取决于不同的传感器型号。传感器外壳振动，会产生一个与振动速度成正比的电压信号。

Eddy current sensor PR6426/010-110+CON021/916-200 epro from Germany

Technical parameter

Different thread lengths

The end of the cable can be self-locking waterproof connector or bare wire

Cables can be armoured or unarmoured

1m cables can be connected with or without a connector.

Applicable temperature: -35℃-+380℃

summarize

The epro shaft vibration sensor consists of three parts: the sensor, the extension line, and the preprocessor. The sensor uses eddy current detection technology to convert the detected distance signal into a standard voltage output, which is sent to the monitor for monitoring and output.

Order goods

When ordering the sensor, you must select the mounting thread form, thread length, metal armor, intermediate joint, extension line length, and preprocessor type. Sensor thread form Specification for mounting threads when the sensor is mounted on the bracket, available in two sizes: metric: M10*1, inch: 3/8 "-24UNF. The thread length is used to adjust the distance between the probe surface and the support during installation. The longer the length, the longer the adjustable length. It must be noted whether the mounting space can accommodate a longer probe body. Metal armor refers to the stainless steel metal protective sleeve outside the extension cable. The sensor extension line can be connected at 1m, the function of the connector is to facilitate installation, if the sleeve type bracket is used, the sensor with an intermediate connector must be selected. The preprocessor is available in explosion-proof class CON011 or standard type CON021. When eddy current sensors are used for shaft vibration measurement, the PR6423 series with probe diameter of 8mm and linear operating range of 2mm is usually selected.

[其他型号推荐]